This handmade wrought iron well cover is the perfect way to cover your well or pond and protect people and animals from falling down it whilst also being a stunning feature!
It is made from a heavy duty 30x30x5mm angle iron outer ring with 12mm round bar wavy inners - welded together for strength. The galvanised and painted finish will also prevent rust making this a maintenance free product.
These covers are made with two fixing lugs on either side so that it can be screwed down. We can also manufacture these with a hinge on one side and a lock plate for padlocking on the other side or with two lock plates so that the cover can be completely removable. There is no extra cost for these options just let us know your preferred option during the messages part of checkout.
Please note that on the hinged well cover the cover may need to be propped up when open so may not be suitable for larger diameter covers. The gap size between the bars is 110mm at its widest.
Please contact us to prior to ordering to discuss the best size to order.
Measuring Guide and Delivery Times
Before you complete your purchase for your gates or railings you need to make sure that you are ordering the correct size.
The widths shown are the size between your posts or pillars and NOT the actual size of the gate or railing.
To work out the size needed you will need to measure (as accurately as possible) the distance between your posts or pillars and this is the size / width that you will need to order.
The heights of the gates and railings shown are the actual height, measured from the bottom to the highest point of the gate or railing. When checking the height of the item needed please do not forget to allow for ground clearance, typically 6cm for gates and 4cm for railings.
If you are having any trouble working out the size required please contact us – we are always happy to help.
When ordering a gate, please let us know if you require:
- The gate to be hung from the left or the right
- Opening inward or outward (when looking from the outside of the property in)
Please place this information in the “messages” section of the checkout. If no message is left, the gate will be made to hang off the left opening inwards.
As most of our items are handmade to order in our workshop, from receiving cleared payment the (approximate) delivery times are as follows:
Just painted gates and railings – 5 to 10 working days.
Galvanised and painted gates and railings – 20 to 27 working days.
For larger items (such as gates and railings) you will be contacted when your item is ready to ship to arrange a delivery date. For smaller items we will not contact you, your item will be shipped as soon as it is ready.
If you have any questions please feel free to contact us.
The Calder Gates team.